Posted by admin | Posted in landscaping | Posted on 03-01-2011
Tags: chainsaw, chainsaw milling chain, diy, mill, milling, milling chain, milling chainsaw, shopping
Milling Chain
Wheat chain transmission shafts that wont trosion shear failure?
Also, have a different mechanical properties do not necessarily fail again Do not you?
You shear fracture on the surface under pressure Wheat as a result of vertical transmission chain torsion failure to ask for I think. One of the mechanical properties of materials, is the torsional strength Torsion of the material does not fail to provide power. Problem The only solution to the lack of torsional strength and torsional more Is to use the strength and resources. .
Check out the Milling Chain listings below and save:
| Shop->Home and Garden->Tools and Accessories | ||||
|
Martin 78A28 Engineered Class Flame Cut Type A Sprocket for 78 Chain, 2.609" Pitch, 28 Teeth, 1.5" Bore Diameter, 24.176" Outside Diameter, 0.875" Wide
USD 544.37 The Martin engineering class, flame cut, Type A sprocket with 2.609-inch pitch is suitable for use with the series 78 chain. The plate thickness is 7/8 inch and roller diameter of 7/8 inch. Engineering class, also called mill chain, sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.82 inches in the 8-tooth option up to 49.85 inches in the 60-tooth option. The size of the stock bore is 15/16 inch for the 8-tooth option, 1 1/4 inch for 9- to 14-tooth option, and 1 1/2 inch for 15- to 60-tooth option. The approximate weight ranges from 9 pounds in the 8-tooth option up to 322 pounds in the 60 tooth option. All teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market. 
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 62C54 Engineered Class Flame Cut Type C Sprocket for 62 Chain, 1.654" Pitch, 54 Teeth, 1.25" Bore Diameter, 29.258" Outside Diameter, 0.75" Wide
USD 753.32 The Martin engineering class, flame cut, type C sprocket with a 1.654-inch pitch is suitable for use with the series 62 chain. Engineering class and mill chain sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type C sprockets have a hub extension on both sides. Some of the benefits of this style include the stability needed for large bores often used with heavy industrial usage with high loads and with large pitches. The options for this class of sprocket are: pitch diameter from 6.39 to 31.60 inches, stock bore size from 15/16 to 1-1/4 inch, recommended max bore size of 2-3/4 to 3-3/4 inches, hub diameter of 4-1/4 to 5-1/2 inches, a length through bore from 3-1/8 to 4-3/8 inches and a weight from 15.8 to 138 pounds. The plate thickness is 3/4 inch and the roller diameter is 13/16 inch. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 78A25 Engineered Class Flame Cut Type A Sprocket for 78 Chain, 2.609" Pitch, 25 Teeth, 1.5" Bore Diameter, 21.692" Outside Diameter, 0.875" Wide
USD 360.68 The Martin engineering class, flame cut, Type A sprocket with 2.609-inch pitch is suitable for use with the series 78 chain. The plate thickness is 7/8 inch and roller diameter of 7/8 inch. Engineering class, also called mill chain, sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.82 inches in the 8-tooth option up to 49.85 inches in the 60-tooth option. The size of the stock bore is 15/16 inch for the 8-tooth option, 1 1/4 inch for 9- to 14-tooth option, and 1 1/2 inch for 15- to 60-tooth option. The approximate weight ranges from 9 pounds in the 8-tooth option up to 322 pounds in the 60 tooth option. All teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 78A30 Engineered Class Flame Cut Type A Sprocket for 78 Chain, 2.609" Pitch, 30 Teeth, 1.5" Bore Diameter, 25.835" Outside Diameter, 0.875" Wide
USD 591.78 The Martin engineering class, flame cut, Type A sprocket with 2.609-inch pitch is suitable for use with the series 78 chain. The plate thickness is 7/8 inch and roller diameter of 7/8 inch. Engineering class, also called mill chain, sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.82 inches in the 8-tooth option up to 49.85 inches in the 60-tooth option. The size of the stock bore is 15/16 inch for the 8-tooth option, 1 1/4 inch for 9- to 14-tooth option, and 1 1/2 inch for 15- to 60-tooth option. The approximate weight ranges from 9 pounds in the 8-tooth option up to 322 pounds in the 60 tooth option. All teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 62A60 Engineered Class Flame Cut Type A Sprocket for 62 Chain, 1.654" Pitch, 60 Teeth, 1.25" Bore Diameter, 32.416" Outside Diameter, 0.75" Wide
USD 938.31 The Martin engineering class, flame cut, type A sprocket with 1.654 inch pitch is suitable for use with the series 62 chain. The plate thickness is 3/4 inch and roller diameter is 13/16 inch. Engineering class and mill chain sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.39 inches in the 12-tooth option up to 31.60 inches in the 60-tooth option. The size of the stock bore is 15/16 from 12 to 20 teeth, and 1 1/4 inch for 24 to 60 teeth. The approximate weight ranges from 6.8 pounds in the 12 tooth up to 169 pounds in the 60-tooth option. All of the teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner-based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 78A17 Engineered Class Flame Cut Type A Sprocket for 78 Chain, 2.609" Pitch, 17 Teeth, 1.5" Bore Diameter, 15.073" Outside Diameter, 0.875" Wide
USD 198.96 The Martin engineering class, flame cut, Type A sprocket with 2.609-inch pitch is suitable for use with the series 78 chain. The plate thickness is 7/8 inch and roller diameter of 7/8 inch. Engineering class, also called mill chain, sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.82 inches in the 8-tooth option up to 49.85 inches in the 60-tooth option. The size of the stock bore is 15/16 inch for the 8-tooth option, 1 1/4 inch for 9- to 14-tooth option, and 1 1/2 inch for 15- to 60-tooth option. The approximate weight ranges from 9 pounds in the 8-tooth option up to 322 pounds in the 60 tooth option. All teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 78A15 Engineered Class Flame Cut Type A Sprocket for 78 Chain, 2.609" Pitch, 15 Teeth, 1.5" Bore Diameter, 13.424" Outside Diameter, 0.875" Wide
USD 153.58 The Martin engineering class, flame cut, Type A sprocket with 2.609-inch pitch is suitable for use with the series 78 chain. The plate thickness is 7/8 inch and roller diameter of 7/8 inch. Engineering class, also called mill chain, sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.82 inches in the 8-tooth option up to 49.85 inches in the 60-tooth option. The size of the stock bore is 15/16 inch for the 8-tooth option, 1 1/4 inch for 9- to 14-tooth option, and 1 1/2 inch for 15- to 60-tooth option. The approximate weight ranges from 9 pounds in the 8-tooth option up to 322 pounds in the 60 tooth option. All teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 78A13 Engineered Class Flame Cut Type A Sprocket for 78 Chain, 2.609" Pitch, 13 Teeth, 1.25" Bore Diameter, 11.778" Outside Diameter, 0.875" Wide
USD 124.88 The Martin engineering class, flame cut, Type A sprocket with 2.609-inch pitch is suitable for use with the series 78 chain. The plate thickness is 7/8 inch and roller diameter of 7/8 inch. Engineering class, also called mill chain, sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.82 inches in the 8-tooth option up to 49.85 inches in the 60-tooth option. The size of the stock bore is 15/16 inch for the 8-tooth option, 1 1/4 inch for 9- to 14-tooth option, and 1 1/2 inch for 15- to 60-tooth option. The approximate weight ranges from 9 pounds in the 8-tooth option up to 322 pounds in the 60 tooth option. All teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 62A26 Engineered Class Flame Cut Type A Sprocket for 62 Chain, 1.654" Pitch, 26 Teeth, 1.25" Bore Diameter, 14.535" Outside Diameter, 0.75" Wide
USD 156.21 The Martin engineering class, flame cut, type A sprocket with 1.654 inch pitch is suitable for use with the series 62 chain. The plate thickness is 3/4 inch and roller diameter is 13/16 inch. Engineering class and mill chain sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.39 inches in the 12-tooth option up to 31.60 inches in the 60-tooth option. The size of the stock bore is 15/16 from 12 to 20 teeth, and 1 1/4 inch for 24 to 60 teeth. The approximate weight ranges from 6.8 pounds in the 12 tooth up to 169 pounds in the 60-tooth option. All of the teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner-based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 62C13 Engineered Class Flame Cut Type C Sprocket for 62 Chain, 1.654" Pitch, 13 Teeth, 0.938" Bore Diameter, 7.725" Outside Diameter, 0.75" Wide
USD 105.70 The Martin engineering class, flame cut, type C sprocket with a 1.654-inch pitch is suitable for use with the series 62 chain. Engineering class and mill chain sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type C sprockets have a hub extension on both sides. Some of the benefits of this style include the stability needed for large bores often used with heavy industrial usage with high loads and with large pitches. The options for this class of sprocket are: pitch diameter from 6.39 to 31.60 inches, stock bore size from 15/16 to 1-1/4 inch, recommended max bore size of 2-3/4 to 3-3/4 inches, hub diameter of 4-1/4 to 5-1/2 inches, a length through bore from 3-1/8 to 4-3/8 inches and a weight from 15.8 to 138 pounds. The plate thickness is 3/4 inch and the roller diameter is 13/16 inch. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 78A21 Engineered Class Flame Cut Type A Sprocket for 78 Chain, 2.609" Pitch, 21 Teeth, 1.5" Bore Diameter, 18.381" Outside Diameter, 0.875" Wide
USD 292.47 The Martin engineering class, flame cut, Type A sprocket with 2.609-inch pitch is suitable for use with the series 78 chain. The plate thickness is 7/8 inch and roller diameter of 7/8 inch. Engineering class, also called mill chain, sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.82 inches in the 8-tooth option up to 49.85 inches in the 60-tooth option. The size of the stock bore is 15/16 inch for the 8-tooth option, 1 1/4 inch for 9- to 14-tooth option, and 1 1/2 inch for 15- to 60-tooth option. The approximate weight ranges from 9 pounds in the 8-tooth option up to 322 pounds in the 60 tooth option. All teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 62A24 Engineered Class Flame Cut Type A Sprocket for 62 Chain, 1.654" Pitch, 24 Teeth, 1.25" Bore Diameter, 13.484" Outside Diameter, 0.75" Wide
USD 135.77 The Martin engineering class, flame cut, type A sprocket with 1.654 inch pitch is suitable for use with the series 62 chain. The plate thickness is 3/4 inch and roller diameter is 13/16 inch. Engineering class and mill chain sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.39 inches in the 12-tooth option up to 31.60 inches in the 60-tooth option. The size of the stock bore is 15/16 from 12 to 20 teeth, and 1 1/4 inch for 24 to 60 teeth. The approximate weight ranges from 6.8 pounds in the 12 tooth up to 169 pounds in the 60-tooth option. All of the teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner-based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 78A35 Engineered Class Flame Cut Type A Sprocket for 78 Chain, 2.609" Pitch, 35 Teeth, 1.5" Bore Diameter, 29.981" Outside Diameter, 0.875" Wide
USD 941.55 The Martin engineering class, flame cut, Type A sprocket with 2.609-inch pitch is suitable for use with the series 78 chain. The plate thickness is 7/8 inch and roller diameter of 7/8 inch. Engineering class, also called mill chain, sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.82 inches in the 8-tooth option up to 49.85 inches in the 60-tooth option. The size of the stock bore is 15/16 inch for the 8-tooth option, 1 1/4 inch for 9- to 14-tooth option, and 1 1/2 inch for 15- to 60-tooth option. The approximate weight ranges from 9 pounds in the 8-tooth option up to 322 pounds in the 60 tooth option. All teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 78A24 Engineered Class Flame Cut Type A Sprocket for 78 Chain, 2.609" Pitch, 24 Teeth, 1.5" Bore Diameter, 20.863" Outside Diameter, 0.875" Wide
USD 343.08 The Martin engineering class, flame cut, Type A sprocket with 2.609-inch pitch is suitable for use with the series 78 chain. The plate thickness is 7/8 inch and roller diameter of 7/8 inch. Engineering class, also called mill chain, sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.82 inches in the 8-tooth option up to 49.85 inches in the 60-tooth option. The size of the stock bore is 15/16 inch for the 8-tooth option, 1 1/4 inch for 9- to 14-tooth option, and 1 1/2 inch for 15- to 60-tooth option. The approximate weight ranges from 9 pounds in the 8-tooth option up to 322 pounds in the 60 tooth option. All teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 78A19 Engineered Class Flame Cut Type A Sprocket for 78 Chain, 2.609" Pitch, 19 Teeth, 1.5" Bore Diameter, 16.727" Outside Diameter, 0.875" Wide
USD 224.35 The Martin engineering class, flame cut, Type A sprocket with 2.609-inch pitch is suitable for use with the series 78 chain. The plate thickness is 7/8 inch and roller diameter of 7/8 inch. Engineering class, also called mill chain, sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.82 inches in the 8-tooth option up to 49.85 inches in the 60-tooth option. The size of the stock bore is 15/16 inch for the 8-tooth option, 1 1/4 inch for 9- to 14-tooth option, and 1 1/2 inch for 15- to 60-tooth option. The approximate weight ranges from 9 pounds in the 8-tooth option up to 322 pounds in the 60 tooth option. All teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 62C20 Engineered Class Flame Cut Type C Sprocket for 62 Chain, 1.654" Pitch, 20 Teeth, 0.938" Bore Diameter, 11.385" Outside Diameter, 0.75" Wide
USD 163.30 The Martin engineering class, flame cut, type C sprocket with a 1.654-inch pitch is suitable for use with the series 62 chain. Engineering class and mill chain sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type C sprockets have a hub extension on both sides. Some of the benefits of this style include the stability needed for large bores often used with heavy industrial usage with high loads and with large pitches. The options for this class of sprocket are: pitch diameter from 6.39 to 31.60 inches, stock bore size from 15/16 to 1-1/4 inch, recommended max bore size of 2-3/4 to 3-3/4 inches, hub diameter of 4-1/4 to 5-1/2 inches, a length through bore from 3-1/8 to 4-3/8 inches and a weight from 15.8 to 138 pounds. The plate thickness is 3/4 inch and the roller diameter is 13/16 inch. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 78A54 Engineered Class Flame Cut Type A Sprocket for 78 Chain, 2.609" Pitch, 54 Teeth, 1.5" Bore Diameter, 45.745" Outside Diameter, 0.875" Wide
USD 1441.07 The Martin engineering class, flame cut, Type A sprocket with 2.609-inch pitch is suitable for use with the series 78 chain. The plate thickness is 7/8 inch and roller diameter of 7/8 inch. Engineering class, also called mill chain, sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.82 inches in the 8-tooth option up to 49.85 inches in the 60-tooth option. The size of the stock bore is 15/16 inch for the 8-tooth option, 1 1/4 inch for 9- to 14-tooth option, and 1 1/2 inch for 15- to 60-tooth option. The approximate weight ranges from 9 pounds in the 8-tooth option up to 322 pounds in the 60 tooth option. All teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 62C30 Engineered Class Flame Cut Type C Sprocket for 62 Chain, 1.654" Pitch, 30 Teeth, 1.25" Bore Diameter, 16.637" Outside Diameter, 0.75" Wide
USD 320.04 The Martin engineering class, flame cut, type C sprocket with a 1.654-inch pitch is suitable for use with the series 62 chain. Engineering class and mill chain sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type C sprockets have a hub extension on both sides. Some of the benefits of this style include the stability needed for large bores often used with heavy industrial usage with high loads and with large pitches. The options for this class of sprocket are: pitch diameter from 6.39 to 31.60 inches, stock bore size from 15/16 to 1-1/4 inch, recommended max bore size of 2-3/4 to 3-3/4 inches, hub diameter of 4-1/4 to 5-1/2 inches, a length through bore from 3-1/8 to 4-3/8 inches and a weight from 15.8 to 138 pounds. The plate thickness is 3/4 inch and the roller diameter is 13/16 inch. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 62C24 Engineered Class Flame Cut Type C Sprocket for 62 Chain, 1.654" Pitch, 24 Teeth, 1.25" Bore Diameter, 13.484" Outside Diameter, 0.75" Wide
USD 247.17 The Martin engineering class, flame cut, type C sprocket with a 1.654-inch pitch is suitable for use with the series 62 chain. Engineering class and mill chain sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type C sprockets have a hub extension on both sides. Some of the benefits of this style include the stability needed for large bores often used with heavy industrial usage with high loads and with large pitches. The options for this class of sprocket are: pitch diameter from 6.39 to 31.60 inches, stock bore size from 15/16 to 1-1/4 inch, recommended max bore size of 2-3/4 to 3-3/4 inches, hub diameter of 4-1/4 to 5-1/2 inches, a length through bore from 3-1/8 to 4-3/8 inches and a weight from 15.8 to 138 pounds. The plate thickness is 3/4 inch and the roller diameter is 13/16 inch. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 62A54 Engineered Class Flame Cut Type A Sprocket for 62 Chain, 1.654" Pitch, 54 Teeth, 1.25" Bore Diameter, 29.258" Outside Diameter, 0.75" Wide
USD 644.25 The Martin engineering class, flame cut, type A sprocket with 1.654 inch pitch is suitable for use with the series 62 chain. The plate thickness is 3/4 inch and roller diameter is 13/16 inch. Engineering class and mill chain sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.39 inches in the 12-tooth option up to 31.60 inches in the 60-tooth option. The size of the stock bore is 15/16 from 12 to 20 teeth, and 1 1/4 inch for 24 to 60 teeth. The approximate weight ranges from 6.8 pounds in the 12 tooth up to 169 pounds in the 60-tooth option. All of the teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner-based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 62C26 Engineered Class Flame Cut Type C Sprocket for 62 Chain, 1.654" Pitch, 26 Teeth, 1.25" Bore Diameter, 14.535" Outside Diameter, 0.75" Wide
USD 276.77 The Martin engineering class, flame cut, type C sprocket with a 1.654-inch pitch is suitable for use with the series 62 chain. Engineering class and mill chain sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type C sprockets have a hub extension on both sides. Some of the benefits of this style include the stability needed for large bores often used with heavy industrial usage with high loads and with large pitches. The options for this class of sprocket are: pitch diameter from 6.39 to 31.60 inches, stock bore size from 15/16 to 1-1/4 inch, recommended max bore size of 2-3/4 to 3-3/4 inches, hub diameter of 4-1/4 to 5-1/2 inches, a length through bore from 3-1/8 to 4-3/8 inches and a weight from 15.8 to 138 pounds. The plate thickness is 3/4 inch and the roller diameter is 13/16 inch. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 62A30 Engineered Class Flame Cut Type A Sprocket for 62 Chain, 1.654" Pitch, 30 Teeth, 1.25" Bore Diameter, 16.637" Outside Diameter, 0.75" Wide
USD 201.99 The Martin engineering class, flame cut, type A sprocket with 1.654 inch pitch is suitable for use with the series 62 chain. The plate thickness is 3/4 inch and roller diameter is 13/16 inch. Engineering class and mill chain sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.39 inches in the 12-tooth option up to 31.60 inches in the 60-tooth option. The size of the stock bore is 15/16 from 12 to 20 teeth, and 1 1/4 inch for 24 to 60 teeth. The approximate weight ranges from 6.8 pounds in the 12 tooth up to 169 pounds in the 60-tooth option. All of the teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner-based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 62C60 Engineered Class Flame Cut Type C Sprocket for 62 Chain, 1.654" Pitch, 60 Teeth, 1.25" Bore Diameter, 32.416" Outside Diameter, 0.75" Wide
USD 853.53 The Martin engineering class, flame cut, type C sprocket with a 1.654-inch pitch is suitable for use with the series 62 chain. Engineering class and mill chain sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type C sprockets have a hub extension on both sides. Some of the benefits of this style include the stability needed for large bores often used with heavy industrial usage with high loads and with large pitches. The options for this class of sprocket are: pitch diameter from 6.39 to 31.60 inches, stock bore size from 15/16 to 1-1/4 inch, recommended max bore size of 2-3/4 to 3-3/4 inches, hub diameter of 4-1/4 to 5-1/2 inches, a length through bore from 3-1/8 to 4-3/8 inches and a weight from 15.8 to 138 pounds. The plate thickness is 3/4 inch and the roller diameter is 13/16 inch. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 62C36 Engineered Class Flame Cut Type C Sprocket for 62 Chain, 1.654" Pitch, 36 Teeth, 1.25" Bore Diameter, 19.791" Outside Diameter, 0.75" Wide
USD 371.88 The Martin engineering class, flame cut, type C sprocket with a 1.654-inch pitch is suitable for use with the series 62 chain. Engineering class and mill chain sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type C sprockets have a hub extension on both sides. Some of the benefits of this style include the stability needed for large bores often used with heavy industrial usage with high loads and with large pitches. The options for this class of sprocket are: pitch diameter from 6.39 to 31.60 inches, stock bore size from 15/16 to 1-1/4 inch, recommended max bore size of 2-3/4 to 3-3/4 inches, hub diameter of 4-1/4 to 5-1/2 inches, a length through bore from 3-1/8 to 4-3/8 inches and a weight from 15.8 to 138 pounds. The plate thickness is 3/4 inch and the roller diameter is 13/16 inch. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
|
Martin 78A46 Engineered Class Flame Cut Type A Sprocket for 78 Chain, 2.609" Pitch, 46 Teeth, 1.5" Bore Diameter, 39.107" Outside Diameter, 0.875" Wide
USD 1386.24 The Martin engineering class, flame cut, Type A sprocket with 2.609-inch pitch is suitable for use with the series 78 chain. The plate thickness is 7/8 inch and roller diameter of 7/8 inch. Engineering class, also called mill chain, sprockets are used with chains that convey material rather than operate the driving mechanism. High carbon steel has high strength and durability. Type A sprockets do not have a hub extension and have a narrow profile. Some of the benefits of this style include the ability to accommodate the drilling of holes for mounting, used with large diameter shafts, can be welded directly to other apparatus, and are easily adaptable for bushing, bearings, sleeves, and so on. Pitch diameter ranges from 6.82 inches in the 8-tooth option up to 49.85 inches in the 60-tooth option. The size of the stock bore is 15/16 inch for the 8-tooth option, 1 1/4 inch for 9- to 14-tooth option, and 1 1/2 inch for 15- to 60-tooth option. The approximate weight ranges from 9 pounds in the 8-tooth option up to 322 pounds in the 60 tooth option. All teeth on the engineering class sprockets have chamfered teeth that help with proper chain engagement. All Martin sprockets meet or exceed ANSI standards. Sprockets are a wheel with teeth around the perimeter that meshes with a chain, track, or other perforated or indented material. Unlike gears that mesh with another gear, sprockets mesh with a chain, which then interact with another sprocket. Gears can be used to transmit power around a corner based on how they fit together. Sprockets with chains only work in straight lines. Some common benefits of chain-drive systems include minimal slippage, a fixed ratio between rotating shafts, and versatility with many different chain attachments and sprocket material selections. An example of a power transmission system is a standard bicycle, which has a sprocket and a chain to deliver power from the rider’s legs to the wheels making the bike move. Martin Sprocket & Gear started in 1951 and is in the machining, fabrication, forging, casting, and powered metal technology, and plastic injection molding of countless power transmission and conveying products for the global market.
Notes : Get free shipping on orders over $25! Stock Status : in-stock
|
|||
511a grinding milling chain.
More Milling Chain listed below:
Paterson calls yesterday for an investigation into Flickr Hygiene "slow" eye Age, the health department had conducted allegations bandied the city's huge budget Blizzard cuts during the recession in revenge for the cleaning. Today, Most of these claims have been reported as fact: when Senator Dan Halloran claims that a group of sanitation workers convicted him the whole recession Confided the scheme. "By their supervisors [was ...
Whatever kind of deal on landscaping equipment, from Milling Chain to trimmers, edgers, even chainsaws, can be found at genevalandscape.com.
So get that Milling Chain and know you are buying with confidence from a great source.
And remember, happy landscaping everyone!
