|
|
Gearwrench Gear Wrench 9509 13 Piece Reversible Combination Ratcheting Wrench Set Sae
from $ 149.99
13-pc. SAE set includes - 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16" & 1" reversible combination ratcheting wrenches Surface Drive design nearly eliminates fastener rounding No need to remove from fastener to change direction with compact reversing lever and additional knuckle clearance provided by 15% off-set Ratcheting box-end needs as little as 5 degrees to move fastener VS. 30 degrees for standard box end wrenches Mirror chrome finish - all metal construction, Manufacturer: GearWrench
Stock Status : In 8 Stores
|
| |
|
|
Denison Hydraulic Pump P46v
USD 3500.00
Denison Pump w/ Manual Rotary Servo Control P46V Specifications - Series : 46 - Serial : 3J14-1822 - Model : P46V-02P-103-2R01-1D04 - Maximum Displacement : 10.3 in.³/REV - Pressure Port (A B) Ratings : 5,000 PSI - Max Speed : 2,400 RPM - Maximum Flow @ 1200 RPM : 53 GPM - Maximum Flow @ 1800 RPM : 79.5 GPM - Maximum Flow @ 2400 RPM : 107 GPM - HP @ Maximum Pressure : 336 HP - Item is new, has never been used and still has the factory caps on the ports. Put the below in you brouser and it will
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
Stock Status : in-stock
|
| |
|
|
Denison Hydraulic Pump W/ Rotary Servo Control P46v
USD 4500.00
Denison Pump w/ Manual Rotary Servo Control P46V Specifications - Series : 46 - Serial : 3J14-1822 - Model : P46V-02P-103-2R01-1D04 - Maximum Displacement : 10.3 in.³/REV - Pressure Port (A B) Ratings : 5,000 PSI - Max Speed : 2,400 RPM - Maximum Flow @ 1200 RPM : 53 GPM - Maximum Flow @ 1800 RPM : 79.5 GPM - Maximum Flow @ 2400 RPM : 107 GPM - HP @ Maximum Pressure : 336 HP - Item is new, has never been used and still has the factory caps on the ports.- This has the factory mount bracket. Con
Notes : Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply.
Stock Status : in-stock
|
| |
|
|
Rev Fan,36 In,208-230/440 V,1 1/2 Hp - DAYTON
USD 1543.00
Exhaust/supply Fan, Belt Drive Reversible With Drive Package, Propeller Dia 36 In, Exhaust/supply Cfm @ 0.000-in Sp 15,927, @ 0.125-in Sp 14,602, @ 0.250-in. Sp 13,074, Max Inlet Temp 104 Deg F, Voltage 208-230/440, 60 Hz, 3 Phase, Operating Amps 4.8-4.8/2.4, Fan Rpm 951, Motor Hp 1 1/2, Height 40 In, Width 40 In, Max Depth 22 In, Mounting Position Horizontal Or Vertical, Propeller Material Cast Aluminum, Number Of Blades 6, Includes Drive Package And Reversing Switch
Notes :
Stock Status : in-stock
|
| |
|
|
Drain Seal,round,tacky,rev - DRAIN PROTECTOR
USD 127.90
Drain Seal, Round, Tacky, Reversible, Dia. 20 In, Material Polyurethane, For Use With Drains 6 In Smaller Than Seal. Forms A Tight Seal Over Drains To Block Out Liquids Including Oils, Water, Certain Solvents And Chemicals, Wash And Store For Repeated Use
Notes :
Stock Status : in-stock
|
| |
|
|
Drain Seal,round,tacky,rev - DRAIN PROTECTOR
USD 283.75
Drain Seal, Round, Tacky, Reversible, Dia. 30 In, Material Polyurethane, For Use With Drains 6 In Smaller Than Seal. Forms A Tight Seal Over Drains To Block Out Liquids Including Oils, Water, Certain Solvents And Chemicals, Wash And Store For Repeated Use
Notes :
Stock Status : in-stock
|
| |
|
|
Drain Seal,sq,tacky,rev,l54in,w54in - DRAIN PROTECTOR
USD 676.00
Drain Seal, Square, Tacky, Reversible, Length 54 In, Width 54 In, Material Polyurethane, For Use With Drains 6 In Smaller Than Seal. Forms A Tight Seal Over Drains To Block Out Liquids Including Oils, Water, Certain Solvents And Chemicals, Wash And Store For Repeated Use
Notes :
Stock Status : in-stock
|
| |
|
|
Drain Seal,round,tacky,rev - DRAIN PROTECTOR
USD 386.50
Drain Seal, Round, Tacky, Reversible, Dia. 42 In, Material Polyurethane, For Use With Drains 6 In Smaller Than Seal. Forms A Tight Seal Over Drains To Block Out Liquids Including Oils, Water, Certain Solvents And Chemicals, Wash And Store For Repeated Use
Notes :
Stock Status : in-stock
|
| |
|
|
Pace Filter, Extended Life REV 2
USD 275.00
8883-0987-P1, Weight: 3 lbs., Manufacturer: PACE INCORPORATED
Notes : Fantastic prices with ease & comfort of Amazon.com!
Stock Status : in-stock
|
| |
|
|
Rev Fan,36 In,115/208-230 V,1 1/2 Hp - DAYTON
USD 1640.00
Exhaust/supply Fan, Belt Drive Reversible With Drive Package, Propeller Dia 36 In, Exhaust/supply Cfm @ 0.000-in Sp 15,927, @ 0.125-in Sp 14,602, @ 0.250-in. Sp 13,074, Max Inlet Temp 104 Deg F, Voltage 115/208-230, 60 Hz, 1 Phase, Operating Amps 18/9.3-9, Fan Rpm 951, Motor Hp 1 1/2, Height 40 In, Width 40 In, Max Depth 22 In, Mounting Position Horizontal Or Vertical, Propeller Material Cast Aluminum, Number Of Blades 6, Includes Drive Package And Reversing Switch
Notes :
Stock Status : in-stock
|
| |
|
|
Rev Fan,36 In,115/208-230 V,1 1/2 Hp - DAYTON
USD 1611.00
Exhaust/supply Fan, Belt Drive Reversible With Drive Package, Propeller Dia 36 In, Exhaust/supply Cfm @ 0.000-in Sp 15,927, @ 0.125-in Sp 14,602, @ 0.250-in. Sp 13,074, Max Inlet Temp 104 Deg F, Voltage 115/208-230, 60 Hz, 1 Phase, Operating Amps 15.2/8.2-7.6, Fan Rpm 951, Motor Hp 1 1/2, Height 40 In, Width 40 In, Max Depth 22 In, Mounting Position Horizontal Or Vertical, Propeller Material Cast Aluminum, Number Of Blades 6, Includes Drive Package And Reversing Switch
Notes :
Stock Status : in-stock
|
| |
|
|
16PC 8MM-25MM CHR REV COMBO RATCHET WR SET
USD 253.98
16PC 8MM-25MM CHR REV COMBO RATCHET WR SET
Notes :
Stock Status : in-stock
|
| |
|
|
Hydraulic Motor,10.1 Cu In/rev,4 Bolt - EATON
USD 520.00
Hydraulic Motor, Displacement 10.1 Cu In/rev, Mount 4 Bolt, 1.75 In Pilot, Keyed Shaft Type, 343 Max Rpm, 1/2-14 Nptf Port Thread, Pressure Rating 2300 Psi, Shaft Dia 1 In, Shaft Length 1.75 In, Min Oil Viscosity 70 Sus, Max Oil Temp 180 F, Length 5.94 In, Width 4.24 In, Height 4.24 In
Notes :
Stock Status : in-stock
|
| |
|
|
Motor,hydraulic,10.1 Cu In/rev,2 Bolt - EATON
USD 511.00
Hydraulic Motor, Displacement 10.1 Cu In/rev, Shaft Dimensions 1 X 1 3/4 In, Shaft Type Keyed, Port Thread 7/8-14 Unf, Max Pressure 2300 Psi, Min Oil Viscosity 70 Sus, Max Oil Temp 180 F, 2 Bolt, 3.25 In Pilot Flange Mount, Maximum Rpm 353, Length 5.94 In, Width 5.17 In, Height 5.17 In
Notes :
Stock Status : in-stock
|
| |
|
|
12 W/REV TOP JAW 6 JAW SCROLL CHUCK"
USD 2456.98
12 W/REV TOP JAW 6 JAW SCROLL CHUCK"
Notes :
Stock Status : in-stock
|
| |
|
|
Drain Seal,round,tacky,rev - DRAIN PROTECTOR
USD 87.55
Drain Seal, Round, Tacky, Reversible, Dia. 12 In, Material Polyurethane, For Use With Drains 6 In Smaller Than Seal. Forms A Tight Seal Over Drains To Block Out Liquids Including Oils, Water, Certain Solvents And Chemicals, Wash And Store For Repeated Use
Notes :
Stock Status : in-stock
|
| |
|
|
Reversible Gear Pullers - puller jaw 3 rev 10
USD 128.74
577-4047 This item features: -Material: Alloy Steel. -Type: Reversible Puller. -Quantity: 1 per pack. -Price is for 1 Each.
Notes : Fantastic prices with ease & comfort of Amazon.com!
Stock Status : in-stock
|
| |
|
|
Hydraulic Motor,3 Cu In/rev,5 Bolt - EATON
USD 440.00
Hydraulic Motor, Displacement 3 Cu In/rev, Mount 5 Bolt, 1.25 In Pilot, Keyed Shaft Type, 393 Max Rpm, 9/16-18 Unf Port Thread, Pressure Rating 2175 Psi, Shaft Dia 5/8 In, Shaft Length 1.03 In, Min Oil Viscosity 70 Sus, Max Oil Temp 180 F, Length 5.12 In, Width 2.37 In, Height 2.37 In
Notes :
Stock Status : in-stock
|
| |
|
|
Hydraulic Motor,.5 Cu In/rev,5 Bolt - EATON
USD 346.50
Hydraulic Motor, Displacement 0.5 Cu In/rev, Mount 5 Bolt, 1.25 In Pilot, Keyed Shaft Type, 1992 Max Rpm, 9/16-18 Unf Port Thread, Pressure Rating 2400 Psi, Shaft Dia 5/8 In, Shaft Length 1.03 In, Min Oil Viscosity 70 Sus, Max Oil Temp 180 F, Length 4.09 In, Width 2.37 In, Height 2.37 In
Notes :
Stock Status : in-stock
|
| |
|
|
10 W/REV TOP JAW 6 JAW SCROLL CHUCK"
USD 2198.98
10 W/REV TOP JAW 6 JAW SCROLL CHUCK"
Notes :
Stock Status : in-stock
|
| |
|
|
6 W/REV TOP JAW 6 JAW SCROLL CHUCK"
USD 1123.98
6 W/REV TOP JAW 6 JAW SCROLL CHUCK"
Notes :
Stock Status : in-stock
|
| |
|
|
8 W/REV TOP JAW 6 JAW SCROLL CHUCK"
USD 1459.98
8 W/REV TOP JAW 6 JAW SCROLL CHUCK"
Notes :
Stock Status : in-stock
|
| |
|
|
Motor,hydraulic,10.1 Cu In/rev,4 Bolt - EATON
USD 488.75
Hydraulic Motor, Displacement 10.1 Cu In/rev, Shaft Dimensions 1 X 1 3/4 In, Shaft Type Keyed, Port Thread 7/8-14 Unf, Max Pressure 2300 Psi, Min Oil Viscosity 70 Sus, Max Oil Temp 180 F, 4 Bolt, 1.75 In Pilot Flange Mount, Maximum Rpm 353, Length 5.94 In, Width 4.24 In, Height 4.24 In
Notes :
Stock Status : in-stock
|
| |
|
|
Hydraulic Motor,.5 Cu In/rev,5 Bolt - EATON
USD 346.50
Hydraulic Motor, Displacement 0.5 Cu In/rev, Mount 5 Bolt, 1.25 In Pilot, Keyed Shaft Type, 1992 Max Rpm, 9/16-18 Unf Port Thread, Pressure Rating 2400 Psi, Shaft Dia 5/8 In, Shaft Length 1.03 In, Min Oil Viscosity 70 Sus, Max Oil Temp 180 F, Length 4.09 In, Width 2.37 In, Height 2.37 In
Notes :
Stock Status : in-stock
|
| |
|
|
Dental Lab 10 Gold Plated Titanium Nitrate Carbide Burs Set
USD 23.99
An ideal 10pc set of burrs for dental applications, 25000 rev/min Low Speed Bur The diameter of burs is 2.35mm. The length of shank is 3.5cm. Great for grinding both metals such as copper or aluminum, etc or non-metallic materials, such as marble, jade, plaster, etc. HRA processing hardness equal or up to 80 Petiolate can basically replace the small wheel, there is no dust pollution High efficiency grinding equal or up to 1000% more efficient than manual files and wheels Extremely Durability which can increase over 10 times than high-speed steel cutting tool and over 200 times than the wheel Allows for smooth, precise, and high-quality cuts and finishes Safe, reliable and easy to use! Our instruments' strength and reliability saves YOU money!
Notes : Fantastic prices with ease & comfort of Amazon.com!
Stock Status : in-stock
|
| |